You Will Need
Black Felt for the eye base Stuffing Red and YellowFelt for the flames on the tail Needle And Thread to sew it together Tan Felt for the belly Orange Felt for the body and tail Green and White Fabric Paintfor the eye detail Tacky Glue Black Fabric Paint for the mouth and nose
Step 1 Make a pattern for your plush. You can draw your own, or download and print the one I drew.
Step 2 Cut out the patterns, and cut the felt out accordingly. You will be stitching on the outside, so there is no need for a seam allowance.
Step 3 Take one of your "main body shape" pieces (the front). Sew the "belly" piece in the middle of the "main body shape" piece as shown. When you're done, set it aside.
Step 4 Take the two "tail" pieces and sew them on both sides up to the point. Leave the flat side open.
Step 5 Take the unused "basic body shape" (the back) piece and cut a hole in the back where you want the tail to be. This is where you will sew in the tail. Cut the hole slightly smaller than the base (the flat side) of the tail.
- Step 6
Put stuffing into the tail, and slide the tail through the hole from the inside out. The pointy end will be away from the body.
I think I deleted the picture for this one. Sorry. :((
Step 7 Take the edges of the hole and fold them so that they are parallel to the end of the tail. There should be 4 layers of felt at this point. Sew through all 4 layers.
Step 8 This is how it should look from the inside....
Step 9 ...and from the outside.
Step 10 Now, you need to paint the "eye base" pieces and let them dry before you sew/glue them on. *NOTE* You may need several coats of paint.
I painted the "eye base" pieces first because I plan on gluing them on. If you want the eyes to be sewn on, sew the eyes to the front of the "basic body shape" piece (where the eyes would be on the face), and then paint them.
Step 11 Set the eyes aside and take both sides of the "basic body shape" pieces. Sew them together almost all the way around, leaving one place open to put stuffing into.
Step 12 Put stuffing into the body, and sew the opening shut.
Step 13 Cut out the flames for the tail. I free-handed these. I didn't have red, but I had extra orange so I substituted it for the red.
Step 14 Sew or glue them onto the end of the tail.
Step 15 Glue the eyes on and paint the face details. And you're done! :D